PLEASE SELECT THE DESTINATION COUNTRY AND LANGUAGE :
Paper (body), EVE plate, Styrofoam, Plastic rods, Rubber, Stainless.
Paper Board, Rod, Rubber Ring, Bolt, Pin Bolt / Nut, Snap Nut / Bolt
It is a creative teaching tool that can induce scientific curiosity and learn the principles of science by assembling a working toy that is familiar to children.
① Fold the robot hand in the shape as shown.
② Fold the arm along the fold line and insert it into the groove as shown.
③ Insert the middle rings of the assembled arm into the grooves and fix them.
④ Insert the locking hook of the hand into the front of the completed arm.
2 Step. Assembling the robot legs
① Fold the robot foot along the fold line.
② Fold the robot leg and insert the hook into the groove to fix it.
③ Fold the bottom of the leg out as shown.
④ Align the hole of leg and foot and fix it with snap bolt and nut.
*Secure the snap bolt, nut by pressing it or rotating it.
3 Step. Assembling the robot head and body
① Fold your head along the fold line.
② Fold the body and fix the side by using the locking hook.
③ Hold the base of the body by hand and spread it out slightly.
* If the bottom of the body is concave, robot legs may not move.
④ Fix it by using pin and pin nut at two places under the robot body.
* Place the pin and the nut in the groove and press with your hand to secure the pin.
⑤ Insert the center of gravity bolt and nut into the groove at the bottom of the body and fix it by turning.
⑥ Insert the snap bolt into the robot's head and press it by hand.
⑦ Insert the thread of the snap bolt into the groove on the upper part of the body and fix it with a nut.
⑧ Fold the sides of the robot's head and insert it inside.
⑨ Insert the antenna into the top of the head as shown.
⑩ Thread the snap bolts on each side of the head to make ears.
4 Step. Assembling of the robot body and legs
① Insert the leg into the body and fit the rod into the holes of the leg and body.
*Check the position of your feet when placing your legs in the body.
② Cover the body and fix it with pin bolts and nuts.
③ Fold your shoulders in a Z shape.
④ Insert the folded robot shoulders on both sides of the body.
⑤ Fit the arm assembled to the rod and fix it with rubber rings.
5 Step. Assembling the inclined plate and inclined throttle
① Fold the inclined plate along the fold line and fix it with snap bolts and nuts.
*Fold the cover inward and assemble as shown in the picture.
② Finished slope plate.
③ Peel off the sticker on the EVA plate and fix it on the inclined plate.
④ Fold the guide of the inclined throttle to the fold line.
⑤ Insert the hook of the inclined throttle into the groove to fix it.
⑥ Completed look.
6 Step. Try to operate the square walking robot
① Lower both arms of the working robot and place it on an inclined plate.
② Push the walking robot's ear (snap bolt) to tilt it, then let go.
③ Place the inclined throttle in front of and behind the inclined plate to observe the movement of the walking robot.